Description: 1070431 ( SICK
)
SICK 1070431 type: DFS60S-BHOA01024 Safety Encoder
Product Name: SICK 1070431 type: DFS60S-BHOA01024 Safety Encoder
Product Brand: SICK
Product Code: 1070431
Product Artikel: SICK 1070431 type: DFS60S-BHOA01024 Safety Encoder
SAFETY-RELATED PARAMETERS Safety integrity level SIL2 (IEC 61508), SILCL2 (IEC 62061) 1) Category 3 (EN ISO 13849) Test rate Not required Maximum demand rate Continuous (analog signals) Performance level PL d (EN ISO 13849) 1) PFH D : Probability of dangerous failure per hour 1.7 x 10 -8 2) T M (mission time) 20 years (EN ISO 13849) Safety-related measuring step 0.09°, Quadrature analysis Safety-related accuracy ± 0.09° 1) For more detailed information on the exact configuration of your machine/unit, please consult your relevant SICK branch office. 2) The values displayed apply to a diagnostic degree of coverage of 99%, which must be achieved by the external drive system and 95 °C operating temperature. PERFORMANCE Sine/cosine periods per revolution 1,024 Measuring step 0.3 ″, For interpolation of the sine/cosine signals with, e. g., 12 bits 1) Initialization time 50 ms 2) Integral non-linearity Typ. ± 45 ″ (without mechanical tension of the stator coupling) Differential non-linearity ± 7 ″ Reference signal, number 1 Reference signal, position 90°, electronically, gated with Sinus and Cosinus 1) Not safety-related. 2) Valid signals can be read once this time has elapsed. ELECTRICAL DATA Communication interface Incremental Communication Interface detail Sin/Cos 1) Connection type Male connector, M23, 12-pin, radial Supply voltage 4.5 V ... 32 V Maximum output frequency + 153.6 kHz Load resistance ≥ 120 Ω Power consumption max. without load ≤ 0.7 W Power consumption Without load Reverse polarity protection ✔ Protection class III (according to DIN EN 61140) Short-circuit protection ✔ 2) 1) 1.0 V SS (differential). 2) Short-circuit to another channel or GND permitted for max. 30 s. In the case of U S ≤ 12 V additional short-circuit to U S permitted for max. 30 s. MECHANICAL DATA Mechanical design Blind hollow shaft with feather key groove Shaft diameter 15 mm Shaft material Stainless steel Flange material Die-cast zinc Housing material Aluminum die cast Weight Approx. 0.25 kg 1) Start up torque ≤ 0.8 Ncm (at 20 °C) Operating torque ≤ 0.6 Ncm (at 20 °C) Permissible movement static ± 0.3 mm (radial) ± 0.5 mm (axial) Permissible movement dynamic ± 0.05 mm (radial) ± 0.1 mm (axial) Max. angular acceleration + 500,000 rad/s² Operating speed 6,000 min⁻¹ 2) Moment of inertia of the rotor 56 gcm² Bearing lifetime 3.6 x 10^9 revolutions 3) 1) Relates to encoders with male connector connection. 2) Allow for self-heating of 3.0 K per 1,000 rpm at the operating temperature measuring point when designing the operating temperature range. 3) On maximum operating speed and temperature. AMBIENT DATA EMC According to EN 61000-6-2, EN 61000-6-3 and IEC 61326-3-1 Enclosure rating IP65 (according to IEC 60529) 1) Permissible relative humidity 90 %, Condensation not permitted Operating temperature range –30 °C ... +95 °C 2) Storage temperature range –30 °C ... +90 °C, without package Resistance to shocks 100 g, 6 ms (according to EN 60068-2-27) 3) Frequency range of resistance to vibrations 10 g, 10 Hz ... 1,000 Hz (EN 60068-2-6) 4) 1) With connector and mating connector fitted minimum IP65. 2) Allow for self-heating of 3.0 K per 1,000 rpm at the operating temperature measuring point when designing the operating temperature range. 3) Checked during operation using vector length monitoring. 4) Checked to operation with vector length monitoring. Including mating connector. CLASSIFICATIONS ECl@ss 5.0 27272501 ECl@ss 5.1.4 27272501 ECl@ss 6.0 27272590 ECl@ss 6.2 27272590 ECl@ss 7.0 27272590 ECl@ss 8.0 27272590 ECl@ss 8.1 27272590 ECl@ss 9.0 27272590 ETIM 5.0 EC001486 ETIM 6.0 EC001486 UNSPSC 16.0901 41112113
