PHOENIX CONTACT PLC-RSP-24UC/21

Access stock, delivery and price for PHOENIX CONTACT PLC-RSP-24UC/21 with PHOENIX CONTACT. PHOENIX, CONTACT, PHOENIX CONTACT, PLC-RSP-24UC/21, PHOENIX PLC-RSP-24UC/21, CONTACT PLC-RSP-24UC/21
To get an offer now: info@imtekmuhendislik.com
Product number PLC-RSP-24UC/21
Producer PHOENIX CONTACT

Description: PLC-RSP-24UC/21 ( PHOENIX CONTACT )

PHOENIX CONTACT PLC-RSP-24UC/21



Product Name: PHOENIX CONTACT PLC-RSP-24UC/21
Product Brand: PHOENIX CONTACT
Product Code: PLC-RSP-24UC/21
Product Artikel: PHOENIX CONTACT PLC-RSP-24UC/21
Dimensions Width 6.2 mm Height 80 mm Depth 94 mm Back to top Environmental conditions Ambient temperature (operation) -40 ° C ... 60 ° C Ambient temperature (stock / transport) -40 ° C ... 85 ° C Back to top Coil side Nominal input voltage UN 24 V AC / DC Typical input current 11 mA at UN (at UN = 24 V AC) 8.5 mA (at UN = 24 V DC) Typical response time 6 ms Typical dropout time 15 ms Protection circuit Bridge rectifier Bridge rectifier Operating voltage display Yellow LED Power loss 0.26 W for rated case Back to top Contact side Contact type 1 PDT Switch contact type Single contact Contact material AgSnO Maximum switching voltage 250 V AC / DC (PLC-ATP separation plate should be placed for voltage greater than 250 V (L1, L2, L3) between similar terminal points of adjacent modules. In this case, potential bridging FBST 8-PLC ... or FBST 500. to be performed with ..) Minimum switching voltage 5 V (at 100 mA) Min. switching current 10 mA (at 12 V) Maximum starting current on request Continuous limit current 6 A Cutting level (ohmic load) max. 140 W (for 24 V DC) 20 W (for 48 V DC) 18 W (for 60 V DC) 23 W (for 110 V DC) 40 W (for 220 V DC) 1500 VA (for 250 V AC) Switching capacity 2 A (at 24 V, DC13) 0.2 A (at 110 V, DC13) 0.1 A (at 220 V, DC13) 3 A (at 24 V, AC15) 3 A (at 120 V, AC15) 3 A (at 230 V, AC15) Back to top Connection data input side Connection name Coil side Connection method Spring-loaded connection Cable stripping length 8 mm Conductor cross section, single wire 0.14 mm² ... 2.5 mm² Conductor cross section, stranded 0.14 mm² ... 2.5 mm² Cable cross section AWG 26 ... 14 Back to top Connection data output side Connection name Contact side Connection method Spring-loaded connection Cable stripping length 8 mm Conductor cross section, single wire 0.14 mm² ... 2.5 mm² Conductor cross section, stranded 0.14 mm² ... 2.5 mm² Cable cross section AWG 26 ... 14

Other Recommended Products PHOENIX CONTACT