Mts Sensor GB-M / GB-T SSI Linear Position Sensors

Access stock, delivery and price for Mts Sensor GB-M / GB-T SSI Linear Position Sensors with Mts Sensor. Mts Sensor GB-M / GB-T SSI Linear Position Sensors, Mts Sensor
To get an offer now: info@imtekmuhendislik.com
Product number GB-M / GB-T SSI
Producer Mts Sensor

Description: GB-M / GB-T SSI ( Mts Sensor )

Mts Sensor GB-M / GB-T SSI Linear Position Sensors



Product Name: Mts Sensor GB-M / GB-T SSI Linear Position Sensors
Product Brand: Mts Sensor
Product Code: GB-M / GB-T SSI
Product Artikel: Mts Sensor GB-M / GB-T SSI Linear Position Sensors
Output Voltage 0…10 VDC and 10…0 VDC (min. load controller: > 5 kΩ) Current 4(0)…20 mA or 20…4(0) mA (min. / max. load: 0 / 500 Ω) Programming Programming of set points using optional accessories 1 Bluetooth® version 2.1 Measured value Position Measurement parameters Resolution 16 bit (minimum 1 µm depending on stroke length) Cycle time ≤ 1200 mm: 0.5 ms ≤ 2400 mm: 1.0 ms > 2400 mm: 2.0 ms Linearity ≤ ±0.02 % F.S. (minimum ±60 µm) typically Repeatability ≤ ±0.005 % F.S. (minimum ±20 μm) typically Operating conditions Operating temperature −40…+90 °C (−40…+194 °F), option: −40…+100 °C (−40…+212 °F) Ingress protection IP67 with proper mating connector IP68 for cable outlet Shock test 100 g (single shock) / IEC standard 60068-2-27 Vibration test 15 g / 10…2000 Hz, IEC standard 60068-2-6 (resonance frequencies excluded) EMC test Electromagnetic emission according to EN 61000-6-4 Electromagnetic immunity according to EN 61000-6-2 The sensor meets the requirements of the EC directives and is marked with . Magnet movement velocity Any Design/Material Sensor electronics housing 2 Stainless steel 1.4305 (AISI 303) Sensor rod Stainless steel 1.4306; 1.4307 (AISI 304L) Stroke length 25…3250 mm (1…128 in.) Operating pressure 350 bar (5076 psi), 700 bar (10153 psi) peak (at 10 × 1 min) Mechanical mounting Mounting position Any Mounting instruction Please consult the technical drawings and the operation manual (document number: 551511) Electrical connection Connection type M12 (5 pin) male connector A-coded M16 (6 pin) male connector Cable outlet Operating voltage +24 VDC (−15 / +20 %) Ripple ≤ 0.28 Vpp Current consumption 100 mA typically dependent on stroke length Dielectric strength 500 VDC (DC ground to machine ground) Polarity protection Up to −30 VDC Overvoltage protection Up to 36 VDC

Other Recommended Products Mts Sensor