Mts Sensor ER-M-0400M-D34-1-V03

Mts Sensor ER-M-0400M-D34-1-V03

Product Name: Mts Sensor ER-M-0400M-D34-1-V03
Product Brand: Mts Sensor
Product Code: ER-M-0400M-D34-1-V03
Product Artikel: Mts Sensor ER-M-0400M-D34-1-V03
Output Voltage 0…10 VDC or 10…0 VDC, 0…10 VDC and 10…0 VDC (controller input resistance RL > 5 kΩ) Current 4…20 mA or 20…4 mA (minimum / maximum load: 0 / 500 Ω) Measured value Position Measurement parameters Resolution Infinite Cycle time Typ. 0.3 ms < t < 2 ms (depending on stroke lengths) Linearity ≤ ±0.02 % F.S. (minimum ±60 μm) Repeatability ≤ ±0.005 % F.S. (minimum ±20 μm) Operating conditions Operating temperature −40…+75 °C (−40…+167 °F) Humidity 90 % rel. humidity, no condensation Ingress protection 1,2 IP67 (if mating connectors are correctly fitted) Shock test 100 g (single shock) IEC standard 60068-2-27 Vibration test 5 g / 10…2000 Hz IEC standard 60068-2-6 (resonance frequencies excluded) EMC test Electromagnetic emission according to EN 61000-6-3 Electromagnetic immunity according to EN 61000-6-2 The sensor meets the requirements of the EC directives and is marked with . Magnet movement velocity ≤ 5 m/s Design / Material Sensor electronics housing Aluminum Guided driving rod Aluminum Stroke length 50…1500 mm (2…60 in.) Mechanical mounting Mounting position Any Mounting instruction Please consult the technical drawings and the brief instructions (document number: 551684) Electrical connection Connection type M12 (5 pin) male connector Operating voltage +24 VDC (−15 / +20 %); UL recognition requires an approved power supply with energy limitation (UL 61010-1), or Class 2 rating according to the National Electrical Code (USA) / Canadian Electrical Code. Ripple ≤ 0.28 Vpp Current consumption 50…140 mA Dielectric strength 500 VDC (DC ground to machine ground) Polarity protection Up to −30 VDC Overvoltage protection Up to 36 VDC