Description: K3G400-AQ31-01 ( Ebmpapst
)
Ebmpapst K3G400-AQ31-01 EC Plug Fan
Product Name: Ebmpapst K3G400-AQ31-01 EC Plug Fan
Product Brand: Ebmpapst
Product Code: K3G400-AQ31-01
Product Artikel: Ebmpapst K3G400-AQ31-01 EC Plug Fan
Weight 32.5 kg Motor size 150 Size 400 mm Rotor surface Painted black Electronics housing material Die-cast aluminum Impeller material Sheet aluminum Support plate material Sheet steel, galvanized Support bracket material Steel, painted black Inlet nozzle material Sheet steel, galvanized Number of blades 7 Direction of rotation Clockwise, viewed toward rotor Degree of protection IP55 Insulation class InchFInch Moisture (F) / Environmental (H) protection class H1 Max. permitted ambient temp. for motor (transport/storage) +80 °C Min. permitted ambient temp. for motor (transport/storage) -40 °C Installation position See product drawing Condensation drainage holes On rotor side Mode S1 Motor bearing Ball bearing Technical features - Output 10 VDC, max. 10 mA - Output 20 VDC, max. 50 mA - Output for slave 0-10 V - Input for sensor 0-10 V or 4-20 mA - External 24 V input (parameter setting) - External release input - Alarm relay - Integrated PID controller - Power limiter - Motor current limitation - PFC, passive - RS-485 MODBUS-RTU - Soft start - EEPROM write cycles: 100,000 maximum - Control input 0-10 VDC / PWM - Control interface with SELV potential safely disconnected from the mains - Thermal overload protection for electronics/motor - Line undervoltage / phase failure detection EMC immunity to interference According to EN 61000-6-2 (industrial environment) EMC interference emission According to EN 61000-6-3 (household environment), except EN 61000-3-2 for professionally used equipment with a total rated power greater than 1 kW Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system) <= 3,5 mA Electrical hookup Terminal box Motor protection Reverse polarity and locked-rotor protection Protection class I (with customer connection of protective earth) Conformity with standards EN 61800-5-1 / CE Approval UL 1004-7 + 60730-1 / EAC / CSA C22.2 No. 77 + CAN/CSA-E60730-1
