Dynisco 1392-1-3 Temperature Indicator

Dynisco

Product number: 1392-1-3 Temperature Indicator
Producer: Dynisco
Confirmed Rating: ☆☆☆☆☆ ☆ (3.1)
Rating Count: 10645

You can fill in the online quotation form or get in touch with Live Support Team for the Dynisco brand, 1392-1-3 Temperature Indicator product. We will get back to you as soon as possible.
PLEASE MAIL TO: info@imtekmuhendislik.com

Datasheets for Dynisco 1392-1-3 Temperature Indicator

Description for Dynisco 1392-1-3 Temperature Indicator

·         350 ohm strain gage input ·         Pushbutton programming and calibration ·         Configwareâ„¢ SW configurable ·         Scalable, voltage or current outputs ·         MODbus communication option ·         Peak and valley detection ·         Transducer interrupt detection ·         UL, cUL recognized ·         CE approved Specifications Performance Characteristics Instrument type: Digital panel meter Display: 5 red LED digits 0.5Inch (12.7mm) high 2 red LED lights for alarm 1 green LED light for remote configuration Accuracy: ±0.1% Normal Mode Rejection Ratio: 60dB at 50/60Hz Sampling Time: 100mS Input Thermocouple: Types J, K, E, L, N, R, S, T RTD: Type PT100 (DIN 43760) Linear Input: 0(4)-20mA and 0(1)-5Vdc and 0(2)-10Vdc Scaling: ˚F or ˚C programmable Alarm Outputs (2) Alarm Type: Two SPST Form C Contact Rating: 0.6A @110Vdc, resistive load 0.5A @220Vdc, resistive load 0.3A @110Vdc, inductive load Alarm Update Time: 100mS Analog Retransmission Outputs Type: 0(4)-20mA, 0(1)-5V or 0(2)-10V. 500Ω, max load Resolution: ±0.05% of output span maximum Accuracy: ±0.2% of span Update Time: 100mS Serial Communication Interface Type: Isolated RS-485 Protocol: ModBus/JBus selectable (half duplex) Baud Rate: 150 – 19200 baud Format: 8 bits + parity; 8 bits without parity Parity: Odd / Even Mechanical & Packaging Characteristics Termination: Screw terminals on rear with safety covers Front Panel: IP65/NEMA4-rated with gasket Operating Temperatures: 32˚ – 130˚F (0˚ – 55˚C) Humidity: 5 – 85% relative humidity, non-condensing Vibration: 10 – 150Hz at a peak of 1G Approvals & Certifications CE Mark: EMC standard EN 61326-1 2002 Safety standard EN 61010-1 2001 Agency approvals: UL: According to UL 3121-1 cUL: According to C22.2 No. 142 C-Tick: Australia Power Supply (Mains) Input Power: 85-264 Vac (24V ac/dc available) Power Consumption: 10W, max Input Protection: Internal thermistor Isolation: Reinforced isolation from instrument and all other I/O circuits  

Latest Comments for Dynisco 1392-1-3 Temperature Indicator

Other Recommended Products Dynisco