Mts Sensor MHRM Mobile Hydraulic Position Sensor

Access stock, delivery and price for Mts Sensor MHRM Mobile Hydraulic Position Sensor with Mts Sensor. Mts, Sensor, Mts Sensor, MHRM, Mts MHRM, Sensor MHRM, Mts Sensor MHRM, , Mts , Sensor
Please ask for offer: info@imtekmuhendislik.com
Product number MHRM
Producer Mts Sensor

Description: MHRM ( Mts Sensor )

Mts Sensor MHRM Mobile Hydraulic Position Sensor



Product Name: Mts Sensor MHRM Mobile Hydraulic Position Sensor
Product Brand: Mts Sensor
Product Code: MHRM
Product Artikel: Mts Sensor MHRM Mobile Hydraulic Position Sensor
Output Signal characteristic Analog output restricted by noise or A/D converter of control unit Voltage 0.25…4.75 VDC; 0.5…4.5 VDC; 0.25…9.75 VDC; 4.75…0.25 VDC; 4.5…0.5 VDC; 9.75…0.25 VDC Current 4…20 mA; 20…4 mA Measured value Position Measurement parameters Resolution ±0.1 mm typical Linearity 0050…0250 mm 0255…2000 mm 2005…2500 mm ≤ ±0.1 mm ±0.04 % (F.S.) ≤ ±0.8 mm Hysteresis ≤ ±0.2 mm Setpoint tolerance ±2 mm Operating conditions Operating temperature −40…+105 °C Storage temperature −25…+65 °C Humidity 90 % relative humidity, no condensation Ingress protection – M12 connector IP67 / IP69K (correctly fitted) Ingress protection – Sensor housing IP67 Shock test (according to EN 50155) According to EN 61373 Cat2 (Bogie) and Cat3 (Axle) Vibration test (according to EN 50155) According to IEC 60068-2-64-Fn Cat3 (Axle) EMC test (according to EN 50155) EN 50121-3-2 ISO 14982 Agricultural and forest machines EN 13309 Construction machines ISO 16750-2 Electromagnetic immunity according to EN 61000-6-2 Electromagnetic emission according to EN 61000-6-3 RF immunity 200 V/m per ISO 11452-2/-4 PCB coating According to EN 50155 Pressure (according to DIN EN ISO 19879)* Ø 7 mm sensor rod Ø 10 mm sensor rod PN (nominal operating) 300 bar 350 bar Pmax (max. overload) 400 bar 450 bar Pstatic (proof pressure) 525 bar 625 bar Design / Material Housing lid Compound PBT (glass fiber reinforced plastic); sealing ring: TPU Sealing O-ring NBR with back-up ring PTFE Sensor electronics housing Stainless steel 1.4305 (AISI 303) Sensor rod – Ø 7 mm Stainless steel 1.4301 (AISI 304) Sensor rod – Ø 10 mm Stainless steel 1.4306 (AISI 304L) Stroke length 50…2500 mm Mechanical mounting Mounting instruction Please consult the technical drawings Mounting position Any Electrical installation Connector InterConnection plug Operating voltage 12 / 24 VDC (8…32 VDC) 24 VDC supply 12 VDC supply Load (output mA) RL  ≤ 500 Ω RL  ≤ 250 Ω Load (output VDC) RL  ≥ 10 kΩ RL  ≥ 10 kΩ Inrush current 4.5 A / 2 ms 2.5 A / 2 ms Operating voltage ripple 1 %PP Power drain ≤ 1 W Over voltage protection (VDC-GND) Up to +36 VDC Polarity protection (GND-VDC) Up to −36 VDC Insulation resistance R ≥ 10 MΩ @ 60 sec according to EN 50155 Dielectric strength 708 VDC (DC ground to machine ground) according to EN 50155 MHRM EMBEDDED – TECHNICAL DATA */ According to calculations under use of the FKM guideline Cycles Ø 7 mm sensor rod Ø 10 mm sensor rod Dynamic pressure: < 2 × 106  pressure cycles 300 bar 350 bar Static pressure: < 2 × 104A  pressure cycles 400 bar 450 bar Proof pressure: Maximum 5 minutes testing time for cylinder pressure test 525 bar 625 bar